PinkFloydSeq EC by Edmundo Cassis
Oscillator 1 timbre
Only square oscillators are enabled, resulting in a narrow sounding tone.
Pulse width of square oscillator is manually set to 50% (50% is perfectly square, 100% is very short pulsewave).
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is off.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 965.37Hz (126) and is modulated by Mod Wheel, Note Vel, VCF Env.
Mod Wheel mod-matrix 2 modulation amount for low-pass filter cut-off frequency is 127.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 103.
Low-pass filter envelope amount is modulated by Note Vel.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Filter resonance is statically set to 63% (161).
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is manually set to 100.
Mood Filter fx
not yet complete
Chorus & Reverb fx
not yet complete
Rack Amplifier fx
not yet complete
Vintage Room Reverb fx
not yet complete
Mod Wheel modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | VCF Cut-off Frequency | 127 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 103 |
| menu | VCF Envelope Velocity Sensitivity | 128 | |
| menu | VCA Envelope Velocity Sensitivity | 128 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 1.13s (128) |
| VCA Envelope Sustain Level | 100% (255) |
| VCA Envelope Release Time | 1.13s (128) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 103 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 1.13s (128) |
| VCF Envelope Sustain Level | 50% (128) |
| VCF Envelope Release Time | 1.13s (128) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |
Ctrl Seq modulator
Controls OSC 1 + 2 Pitch.
| function | type | destination | amount |
|---|---|---|---|
| pitch | matrix | OSC 1 + 2 Pitch | 12 |
| name | value |
|---|---|
| Ctrl Sequencer Enable | on |
| Ctrl Sequencer Clock Divider | 10 |
| Sequence Length | 6 |
| Sequencer Swing Timing | 0 |
| Key Sync & Loop | 2 |
| Slew Rate | 0 |
| Seq Step Value 1 | 128 |
| Seq Step Value 2 | 105 |
| Seq Step Value 3 | 128 |
| Seq Step Value 4 | 150 |
| Seq Step Value 5 | 20 |
| Seq Step Value 6 | 54 |